Short answer: The short answer to new gutters cost near me is about $6 to $12 per linear foot for installed seamless aluminum, the most common choice. For a typical 2,000 square foot house, that totals roughly $1,300 to $3,100 once downspouts and removal of the old gutters are included. Vinyl costs less. Steel and copper cost more. The "cost of new gutters" means the full installed price of the gutter run, the downspouts, and the removal of whatever hangs on your house now. Ready for quotes? Compare local pros →
In this guide
Your own number depends on how many feet of gutter your roofline needs, the material, the height of your house, and local labor rates. This article shows you how to measure your footage, what each material costs per foot, what the per-foot price leaves out, and how to compare quotes so you can budget before anyone visits your property.
Guardian Gutter Guide is an independent homeowner resource, not a contractor. Marcus Delaney, a former gutter installer with 12 years of experience, wrote this guide, and home inspector Dana Whitfield reviewed it. The figures here are national ranges. Actual quotes vary by installer, roof access, and local labor rates.
Why your new gutter price depends on where you live
Two houses with identical gutters can get very different quotes because labor rates, roof access, and climate change from market to market. Material costs move far less. That is why a national average is only a starting point.
What published national averages say
Published averages for a typical house disagree widely, from about $1,200 to about $4,000. Per-foot ranges are just as wide, running from roughly $3 to $40 across all materials and styles. The gap comes from definitions. Some sources price a simple run of aluminum, while others include removal, downspouts, and larger or taller homes.
A national average is a budgeting midpoint inside a wide spread, not a quote.
When you see one figure, ask what it counts. Your estimate should be built from your own footage and your own material choice, which the next section shows you how to do.
What moves your local price
Several local factors shift the final number. Most of them come down to how hard and how long the job is for the crew.
- Labor rates: Installer labor commonly runs $5 to $10 per linear foot, and hourly rates vary by market.
- Stories: Two- and three-story homes need taller ladders and more safety gear, so the per-foot price climbs.
- Roof complexity: Multiple gables, steep pitches, and many corners add cuts, seams, and time.
- Climate: Heavy rain or snow areas often need wider gutters, sturdier material, or more downspouts. Standard residential gutters are 5 inches wide, and 6-inch gutters cost more.
- Removal: Hauling away old gutters typically adds $100 to $300 when you replace instead of install new.
What should this cost you?
Answer four questions and get a fair price range for your home.
How to estimate your new gutter cost before you call
You can build a solid budget in three steps. Measure your linear feet, multiply by a per-foot price, then add downspouts and removal.
Measure your linear feet
Walk the ground along every roof edge that sheds water, usually the eaves, and measure with a tape or measuring wheel. Skip gable ends, which normally have no gutter. Add up the sections for an L-shaped or complex house. A roof with only two slopes may need gutters on just two sides.
Then count downspouts. A common rule is one per 35 feet of gutter, with more in rainy areas. Measure from each gutter outlet to the ground, because that height is billed as downspout footage.
Rough footage and cost by house size
House size is only a proxy, because gutter footage follows your roof’s perimeter. Two-story homes need less gutter per square foot than ranches, but cost more per foot. The table assumes a typical mix and a simple roofline, priced as installed seamless aluminum.
| Home size | Typical gutter run | Low ($6/ft) | Mid ($9/ft) | High ($12/ft) |
|---|---|---|---|---|
| 1,000 sq ft | 100 ft | $600 | $900 | $1,200 |
| 1,500 sq ft | 130 ft | $780 | $1,170 | $1,560 |
| 2,000 sq ft | 160 ft | $960 | $1,440 | $1,920 |
| 2,500 sq ft | 190 ft | $1,140 | $1,710 | $2,280 |
| 3,000 sq ft | 220 ft | $1,320 | $1,980 | $2,640 |
So 100 feet of gutter costs about $600 to $1,200 installed in aluminum. Your measured footage beats this table every time.
A worked example
Take a 2,000 square foot single-story house with 160 feet of gutter and five downspouts of 10 feet each, which is 50 feet of downspout. The downspout price used here is $5, $8, or $18 per foot, and old gutter removal is included.
| Line item | Low | Mid | High |
|---|---|---|---|
| Gutters, 160 ft at $6, $9, $12 | $960 | $1,440 | $1,920 |
| Downspouts, 50 ft | $250 | $400 | $900 |
| Old gutter removal | $100 | $200 | $300 |
| Total | $1,310 | $2,040 | $3,120 |
Add footage, downspouts, and removal separately, and you will see where a quote is padded.
New gutter cost by material and style
Material is the biggest lever you control. Vinyl is cheapest, aluminum is the standard, and steel and copper are premium choices that last longer.
Price and lifespan by material
Published per-foot lists blur materials and labor, so treat these as installed ballparks. Confirm what each quote includes.
| Material | Installed price per foot | 100 ft run | Typical lifespan |
|---|---|---|---|
| Vinyl | $4 to $8 | $400 to $800 | 10 to 20 years |
| Aluminum | $6 to $12 | $600 to $1,200 | About 20 years |
| Galvanized steel | $10 to $20 | $1,000 to $2,000 | 20 to 30 years |
| Copper | $20 to $40 | $2,000 to $4,000 | 50 to 100+ years |
Aluminum wins for most homeowners. It is lightweight, takes paint, and resists rust. Vinyl can crack in extreme cold and fade in sun. Steel handles impact and wind but rusts if neglected, and copper is a long-term investment for homes where appearance matters.
Seamless vs sectional, K-style vs half-round
Seamless gutters are formed on site in one piece, run around $10 per foot installed, and leak less because they have few joints. Sectional gutters use pre-made 5-, 10-, or 15-foot pieces. They cost less but can leak where the sections join.
K-style gutters have a flat back and carry roughly twice the water of half-round gutters of similar size. Half-round gutters suit older and historic homes. Their price ranges overlap, so choose by water capacity and look rather than cost. Custom fascia-style gutters can run far higher.
For most homes, seamless aluminum in a K-style profile is the best value per dollar.
What the per-foot price leaves out
A per-foot price rarely covers everything. Downspouts, removal, guards, and add-ons are often separate lines, and they can add 30% or more to a bare gutter quote.
Common extras and their prices
| Extra | Typical price |
|---|---|
| Downspouts | $5 to $18 per linear foot |
| Old gutter removal and disposal | $100 to $300 |
| Gutter guards | $1.50 to $10 per linear foot |
| Downspout extensions | $40 to $150 |
| Heat tape for icy climates | $150 to $300 per 100 ft |
| Underground drainage | $25 to $50 per linear foot |
Guards are the extra worth thinking about early. Adding them during installation is usually cheaper than retrofitting later, and they cut the $100 to $400 you would otherwise spend on yearly professional cleaning.
Should you replace or repair?
Replace when gutters are near the end of their life or water is reaching your foundation. A 20-year-old aluminum system is at its typical lifespan, so persistent sagging, cracks, rust, peeling paint, or gutters pulling from the fascia point toward replacement.
If one section leaks or sags, repair is cheaper. Most repairs cost $175 to $250, though the full range runs from about $70 to $590. A good rule is to replace when repairs touch several sections, or when a few repair bills approach the price of new gutters.
If water is damaging your foundation or basement, replacing gutters costs far less than repairing the damage they stopped preventing.
How to get fair quotes for new gutters near you
Request three written quotes built on identical specifications. Quotes that differ in footage, gutter width, or downspout count cannot be compared by the total alone.
What to put in every quote request
Send each installer the same details so the numbers line up:
- Total linear feet and the number of downspouts
- Gutter width (5 inch or 6 inch) and profile
- Material and thickness
- Seamless or sectional
- Whether old gutter removal and hauling are included
- Guards, if wanted, and the workmanship warranty
Contractor, retailer, or DIY
A big-box store’s advertised gutter price is a material price, not an installed price, so ask who does the work and what the labor costs. DIY is rarely worth the savings. The job needs ladders, usually two people, and careful measurement of pitch. A bad install can damage your fascia and foundation. A professional crew can typically hang about 50 feet of gutter in several hours, and most homes take one to three days.
The cheapest quote is only cheaper if it covers the same footage, width, and downspouts as the others.
Budgeting for new gutters with confidence
New gutters near you cost roughly $6 to $12 per installed foot in aluminum, more for steel and copper. Measure your footage, add downspouts and removal, and expect a typical house to land around $1,300 to $3,100. Compare three quotes with matching specs, and ask what each one includes.
Once you have your estimate, you can talk to installers knowing what is fair. If your gutters are ready to go, you can request a free gutter replacement estimate and compare it against the figures you worked out here.
What should this cost you?
Answer four questions and get a fair price range for your home.